Janome AcuFeed Professional Grade Foot (HP2) – Accessory Of The Month December 2020

 

This foot provides superior visibility and is great for curves and precise topstitching. It holds fabrics firmly in sync with the feed dogs to achieve professional results.

This Accessory of the Month has a bonus project for you to make.

Download brochure here

 

Beading Foot – Accessory Of The Month November 2020

 

Sewing on strung beads and pearls have always been a tedious task but the beading foot now goes some small way to alleviating this and to add pleasure to embellishment. Popular for bridal wear, evening wear, smart/casual or crafts.

Janome has 2 sizes in Beading Foot – narrow groove for beads up to 2mm in diameter and wide groove for beads 2.5 – 4mm in diameter.

This Accessory of the Month has a bonus project for you to make.

Download brochure here

 

Transport Your Machines In Style And Safety

 

Designed for the sewist on the go, Janome have some groovy carry bags specially created to transport your sewing machines safely from one club meeting to the next sewing class.

Sew on the go! Take your sewing machine with you

Available in a stylish red and white print, the Janome sewing machine bag features an impact-resistant plastic shell base and padded walls for excellent protection. Its generously sized compartment gives you plenty of storage room, and there is also a convenient front pocket to store your foot control, instruction book and other sewing accessories. The sewing machine bag will suit all Janome machines up to 4300QDC.

The overlocker carry bag comes in handy when transporting or storing your overlocker machine. Lightweight and spacious, it will fit all Janome 4-thread overlockers with room to spare. The sturdy base and padded walls will keep your machine safe and secure on the move, while the comfortable carry handles offer additional support. The overlocker bag will fit up to AT2000D.

Janome Sewing Machine Carry Bag measures L 41cm x W 20.5cm x H 33cm

Janome Overlocker Machine Bag measures L 35cm x W32cm x H 35cm

Even if you’re not transporting your sewing machines or overlockers, the carry bags offer dust-free storage and protection at home.

Check it out at your nearest Janome dealer today!

Sliding Guide Foot – Accessory Of The Month September 2020

 

Edge stitching could not get any easier with the Sliding Guide Foot! You can adjust the flange to sit from 3/8’’ up to 1 ¼’’ away from the edge of the foot in seconds and create perfectly straight hems every time. The Janome Sliding Guide Foot manually adjusts to perfectly align with the exact distance you want. The guide can be moved freely and easily by just lifting the lever in the back of the foot. The clear markings make certain you know exactly where you want your foot to go while lining the guide up on a edge or seam.

This Accessory of the Month has a bonus project for you to make.

Download brochure here

 

Stitch Composer Software

 

Have you ever looked at your sewing machine and wished for another stitch that would look perfect on your current project or have you just wanted to create your own unique sewing stitches that aren’t available to anyone else?

The Janome Stitch Composer PC software gives you the ability to create your own unique sewing stitches right on your computer screen. Once the stitches have been created, they are then exported via USB stick to be sewn out on the supported machine. The stitches are easy to create using the intuitive software and can be built from imported images or you can let your creative flair run wild and create from your mind, either way you will be delighted with the results.

Learn more about creating your own stitches in this video which takes you through the process to create your own stitches.

 

You can also create a stitch pattern using a background image. Click here to find out more.

The Stitch Composer software is included with the following current models Memory Craft 15000 Quilt Maker (included as a part of the Horizon Link Suite), Continental M7 Professional, Memory Craft 9450QCP, Skyline S9 and the Skyline S7 (the software was also included with the Memory Craft 12000 and Memory Craft 9400QCP.

Ruler Work Foot – Accessory Of The Month August 2020

 

The ¼” Ruler Foot was specifically designed to use with quilting rulers for ruler work.

Guide quilting templates along the edge of the foot to create straight, curved, or repetitious patterns depending on your ruler or quilting template. Rulerwork quilting can create unique finishes to your quilting projects.

Using rulerwork rulers and shapes in conjunction with a rulerwork foot, you can achieve the perfect professional looking finish to your quilted projects.

This Accessory of the Month has a bonus project for you to make.

Click here to find out more

 

HP2 Foot

 

AcuFeed Flex Professional Grade Foot (HP2) Part Number: 202 415 004

 

Combining the Professional Grade Foot (HP) with the AcuFeed Flex system, Janome have created the AcuFeed Flex Professional Grade Foot (HP2).

The HP2 foot is great for curves and precise topstitching, the narrow foot width and shape of the slit at the front of the foot giving superior visibility compared to other feet. The shape of the foot allows the foot to remain horizontal and the top feed dog provides smooth feeding of the top layer of fabric in sync with the bottom layer of fabric.

When sewing with the AcuFeed Flex Professional Grade Foot (HP2), the Professional Grade Needle Plate (HP), must be attached to the machine and only the available stitches for use with this needle plate will be shown. The Professional Grade Needle Plate and associated feet (HP & HP2) utilize the left side feed dogs, resulting in a stable fabric feed and optimal stitch formation, similar to that of an industrial sewing machine.

The AcuFeed Flex Professional Grade Foot (HP2) is an included accessory with:

  • Continental M7 Professional
  • Memory Craft 9450QCP

The AcuFeed Flex Professional Grade Foot (HP2) is an optional accessory for:

  • Memory Craft 15000 Quilt Maker (Ver 3.0)
  • Memory Craft 9400QCP
  • Memory Craft 6700P

For Sewing:The HP2 is great for quilting and sewing leather or vinyl, it is also great for eliminating puckering when sewing knit fabric.

For Quilt Piecing:The Janome AcuFeed Flex Professional Grade Foot (HP2) is sized perfectly for sewing a scant ¼” seam, just match the edge of the foot against the edge of the fabric and sew the perfect scant ¼” seam.

AcuFeed Flex System

 

 

Features of the AcuFeed Flex System

  • Upper Feed Teeth moves forward and then gently moves the fabric back with the Lower Feed Teeth
  • Upper Feed Teeth REPLICATES Lower Feed Teeth for maximum contact with fabric and better fabric movement, eliminating gathering, puckering and pulling
  • Twin Dual Feed Holder Upper Feed Dogs reach in front of the needle to assist in feeding from the fabric when sewing from the edge of the fabric
  • Interchangeable Sole allows for a variety of specialty feet and applications

The system uses Upper Feed Teeth in conjunction with the Lower Feed Teeth to gently move the multiple layers of fabric through the machine. The Upper feed teeth move with the fabric as the Lower feed teeth move, feeding both the top and bottom layers of fabric at the same time.

All AcuFeed Flex models come with the Twin AcuFeed foot which is a mirror image of the regular feed dogs. When the foot is lowered it then applies pressure evenly to the top and bottom of the fabric, which allows for both layers to be moved together at the same rate.

The Twin AcuFeed foot is unique because the feed teeth extend in front of the needle allowing for fabric in front of the needle to be moved by the upper feed teeth. This feature gives the AcuFeed flex system an advantage over other feet which only begin moving the fabric with the upper feed system once the fabric is past the needle.

The AcuFeed Flex system is set up so that the Upper and Lower feed teeth both move at the same rate, but there are times when the Upper feed is required to move at a faster/ slower rate. This allows the top layer of fabric to move at a different rate, eliminating puckering or stretching of the top layer if it is a different material to the bottom layer. The feeding rate of the Upper feed teeth is regulated by adjusting the Dual Feed Balance (refer to your instruction on how to adjust).

AcuFeed Flex is a feature only available on premium Janome sewing models Memory Craft 15000QM, Continental M7 Professional, Memory Craft 9450QCP, Skyline S9, Memory Craft 8200 QC, Memory Craft 6700P, Skyline S7, Skyline S6. There are three variation of Acufeed Flex feet available in the Janome range Twin, Single and Professional. There are many different options to choose from so we have listed all options below.

The twin AcuFeed Flex is Standard Accessory for ALL AcuFeed Flex models
• Dual Feed Holder (Twin) 859 817 004 (Standard part)
• Dual Feed Sole AD 859819109 (Standard part)
• Dual Feed Open Toe UD (Twin – Sole only) 202 149 004
• ¼” Piecing OD (Twin – Sole only) 202 103 004
• Ditch Quilting STD (Twin – Sole only) 202 103 006
• Straight Stitch (Twin – Sole Only) 202 102 005

AcuFeed Flex – Single
• Dual Feed Holder (Single) 859 833 006
• Dual Feed Foot VD (Single – Sole only) 859 835 101
• Dual Feed Foot ED (Single – Zipper Sole only) 859 838 001

AcuFeed Flex-Professional Grade Foot
• For use with Memory Craft 15000QM, Continental M7 Professional, Memory Craft 9450QCP, Memory Craft 6700P
• HP2 – Straight Stitch Foot – 202415004

Scroll Up