AT2000D Professional

At a glance…

  • Air Thread Overlocker
  • Easiest Looper Threading
  • Built-in Needle Threader
  • Wide Flat Workarea
  • 4, 3 or 2 Thread

DOWNLOAD BROCHURE

The Air Thread 2000D Professional is our first air thread overlocker and the easiest Janome overlocker to thread. Janome’s push and blow type air threading system is an industry first. When threading the loopers, the thread is blown down the threading channel and through the eye of the looper. The needles are just as easy to thread, using the built-in needle threader which slides left and right, allowing the user to thread the required needle. Sewing specialty fabrics is a breeze, the 8-piece feed dog allows fabric to smoothly feed under the sewing foot, plus grooves have been added to the sewing foot to help control challenging or slippery fabrics during stitching.  The 5-level foot pressure dial is located on the top left of the overlocker. Integrating the stitch length and differential dials makes for easy and perfect adjustment for the fabric being sewn, whether sewing stretch to lightweight woven fabric. Adjusting the cutting width or dropping the upper knife, is all easily accessed in the one place, open the front cover and just the turn of a dial lowers the upper knife, turn again to re-engage. Safety is important, the overlocker will not operate if, any covers are open, the sewing foot is raised or if the air thread mechanism is engaged. Another industry first is two ball bearing on the main shaft which provide low torque, making this overlocker powerful and stable when operating, even at high speeds. All of these features are specially designed to make this overlocker the easiest to use on the market today..

Instructional Video CLICK HERE

Own this machine already? Register your warranty

Compare Find a Stockist

PRODUCT INFORMATION

Additional information

Number of Threads

4

Overlock Stitch

Using 4, 3 or 2 threads

Flatlocking

Yes

Rolled Hemming

Yes including lower looper pretension slider

Cover Hem

No

Top Cover Hemming

No

Chain Stitch

No

Threading Chart

Yes

Colour Coded Thread Guides

Yes

Program Stitch Display

No

Type of Tension

Manual, lay-in type

Tension Release

Yes, lift presser foot

Sewing Speed

up to 1300 stitches per minute

Adjustable Stitch Length

1.0mm to 5.0mm

Adjustable Cutting Width

3.3mm to 7.5mm

Differential Feed Ratio

0.5mm to 2.0mm

Adjustable Foot Pressure

Yes, via dial with 5 levels

Free Arm

No

Needle System

Janome Ballpoint HAx1SP

Machine Weight

7.9Kg

Machine Cover

Yes, dust cover

Quick change to rolled hem

Yes

Retractable Upper Knife

Yes, via dial

Two Thread Converter

Yes, built-in

Thread Cutter

Yes, on face plate

Accessory Box

Yes

Waste Tray

Yes

Foot Control

Yes

Carry Handle

Yes

Machine Size

W374 x H280 x D284mm

Instructional DVD

Yes

STANDARD ACCESSORIES

STANDARD ACCESSORIES

·         Overlock Foot (on overlocker)
·         Screwdriver (Lge)
·         Screwdriver (Sml)
·         Double ended spanner
·         Tweezers
·         Needle Set – Organ HAx1SP (2 x #11, 3 x #14)
·         Net x 4
·         Spool Holder Cap (Lge) x 4
·         Lint Brush
·         Oil
·         Needle holder / spreader pin
·         Spare Upper Knife
·         Looper threading wire
·         Accessory Box
·         Waste Chip Box
·         Instruction Book
·         Ovrlocker Dust Cover
·         Foot Control
Instructional Video link above on this page.

OPTIONAL ACCESSORIES

OPTIONAL ACCESSORIES

FEET | ATTACHMENTS
Part Number Description
202041108 Beading Foot with beading guide attachment
200203104 Blind Hem Foot
200216100 Cloth Guide
200207108 Cording Foot I
200208109 Cording Foot II
200218102 Elastic Gathering Attachment
200248101 Gathering Foot
200219103 Piping Foot 3mm
200220107 Piping Foot 5mm
NEEDLES
Part Number Description
990200000 Ballpoint Needles HAx1SP – Mixed (pkt 5)
990211000 Ballpoint Needles HAx1SP – Size 11 (pkt 5)
990212000 Ballpoint Needles HAx1SP – Size 12 (pkt 5)
990214000 Ballpoint Needles HAx1SP – Size 14 (pkt 5)